Al Metals & Methods Private Limited
Sahibabad Industrial Area, Ghaziabad, Uttar Pradesh
Send E-mail
Send SMS
Home»Our Products»

Aluminum Gravity Die Casting

Permanent mold typically has a better finish than a sand casting and produces a casting with significantly stronger mechanical properties as well.

This method of casting is achieved by gravity pour into one of the following applications: static or tilt-pour mold machines. Molten aluminum is poured into the mold by operator directly and the metal is allowed to solidify before opening the die. In this process, the mold is made in two halves from cast iron or high strength steel. If cores are to be used, they can be metal inserts, which operate mechanically in the mold, or sand cores, which are placed in the molds before closing (semi-permanent molding).


The mold halves are preheated and the internal surfaces are coated with a refractory. If static pouring is to be used, the molds are closed and set into the vertical position for pouring; thus, the parting line is in the vertical position. In tilt pouring, the mold is closed and placed in the horizontal position at which point molten metal is poured into a cup(s) attached to the mold. The mold then is tilted to the vertical position, allowing the molten metal to flow out of the cup(s) into the mold cavity. The various permanent mold techniques static pour and tilt pour offer a variety of advantages for a variety of metal forming applications.


REQUEST CALLBACK
Approx. Rs 230 / Kilogram
Get Best Quote
Specifications:
Installed capacityGravity die
Casting
Aluminum alloy castings.
Weight range (max & min)
300 tpa
Min-0.500kg
Max-15kg
    Yes! I am Interested
    REQUEST CALLBACK
    Approx. Rs 240 / Kilogram
    Get Best Quote
    Specification:
    • Weight of the casting - 4.00 Kgs
    • Alloy - LM 25/ IS 4450 T6.
    • Pressure testing upto 7 bar.

    Additional Information:
    • Minimum Order Quantity: 500 Kilogram
    Yes! I am Interested
    REQUEST CALLBACK
    Approx. Rs 225 / Kilogram
    Get Best Quote
    Specification:
    • Weight of this product is about 1.6 kgs. Alloy is LM 6/ IS 4600.
    • Diameter is 330 mm.
    • Customer - Indian Railways. Die Development time - 2 weeks.

    Additional Information:
    • Minimum Order Quantity: 500 Kilogram
    Yes! I am Interested
    X
     

    Download Brochure
    Al Metals & Methods Private Limited

    Amit Tadvalkar (Director)
    No. 54/5, Site 4, Sahibabad Industrial Area
    Ghaziabad - 201010
    Uttar Pradesh, India
    Send Email
    © Al Metals & Methods Private Limited. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited